dmesg - Intel Xeon E5-2620 0

Return To Intel Xeon E5-2620 0 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.2.1.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Mar 13 00:26:49 UTC 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000095400 (usable)
 BIOS-e820: 0000000000095400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007cf85000 (usable)
 BIOS-e820: 000000007cf85000 - 000000007d095000 (ACPI NVS)
 BIOS-e820: 000000007d095000 - 000000007d3b4000 (reserved)
 BIOS-e820: 000000007d3b4000 - 000000007d427000 (ACPI data)
 BIOS-e820: 000000007d427000 - 000000007d42d000 (reserved)
 BIOS-e820: 000000007d42d000 - 000000007d42e000 (ACPI NVS)
 BIOS-e820: 000000007d42e000 - 000000007d43f000 (reserved)
 BIOS-e820: 000000007d43f000 - 000000007d442000 (ACPI NVS)
 BIOS-e820: 000000007d442000 - 000000007d4b4000 (reserved)
 BIOS-e820: 000000007d4b4000 - 000000007d4b5000 (usable)
 BIOS-e820: 000000007d4b5000 - 000000007d4b6000 (ACPI NVS)
 BIOS-e820: 000000007d4b6000 - 000000007d4bc000 (reserved)
 BIOS-e820: 000000007d4bc000 - 000000007d4c4000 (ACPI NVS)
 BIOS-e820: 000000007d4c4000 - 000000007d4eb000 (reserved)
 BIOS-e820: 000000007d4eb000 - 000000007d56e000 (ACPI NVS)
 BIOS-e820: 000000007d56e000 - 000000007d800000 (usable)
 BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF0480
DMI: MSI MS-7735/X79A-GD45 (MS-7735), BIOS V1.0 10/14/2011
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D7FFF write-protect
  D8000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FF800000000 write-back
  1 base 000800000000 mask 3FFF80000000 write-back
  2 base 00007E000000 mask 3FFFFE000000 uncachable
  3 base 000080000000 mask 3FFF80000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 2GB, type WB
reg 2, base: 2016MB, range: 32MB, type UC
reg 3, base: 2GB, range: 2GB, type UC
total RAM covered: 32736M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2016MB, range: 32MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 2GB, type WB
e820 update range: 000000007e000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7d800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007d800000
 0000000000 - 0040000000 page 1G
 0040000000 - 007d800000 page 2M
kernel direct mapping tables up to 7d800000 @ 10000-12000
init_memory_mapping: 0000000100000000-0000000880000000
 0100000000 - 0880000000 page 1G
kernel direct mapping tables up to 880000000 @ 11000-12000
RAMDISK: 3725e000 - 37fef35e
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 000000007d3b4078 00074 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000007d3bbd98 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 000000007d3b4180 07C15 (v02 ALASKA    A M I 00000007 INTL 20051117)
ACPI: FACS 000000007d4c1f80 00040
ACPI: APIC 000000007d3bbe90 000BE (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000007d3bbf50 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: MSDM 000000007d3bbf90 00055 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: HPET 000000007d3bbfe8 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
ACPI: SSDT 000000007d3bc020 6A944 (v02  INTEL    CpuPm 00004000 INTL 20051117)
ACPI: EINJ 000000007d426968 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 000000007d426a98 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 000000007d426ca8 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 000000007d426d50 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000880000000
Bootmem setup node 0 0000000000000000-0000000880000000
  NODE_DATA [0000000000011000 - 0000000000044fff]
  bootmap [0000000000100000 -  000000000020ffff] pages 110
(7 early reservations) ==> bootmem [0000000000 - 0880000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000201b0a4]    TEXT DATA BSS ==> [0001000000 - 000201b0a4]
  #3 [003725e000 - 0037fef35e]          RAMDISK ==> [003725e000 - 0037fef35e]
  #4 [0000095400 - 0000100000]    BIOS reserved ==> [0000095400 - 0000100000]
  #5 [000201c000 - 000201c1cd]              BRK ==> [000201c000 - 000201c1cd]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
found SMP MP-table at [ffff8800000fcc60] fcc60
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 34816MB)
 [ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800371fffff] on node 0
 [ffffea0010800000-ffffea001dbfffff] PMD -> [ffff880038000000-ffff8800453fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00880000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x00000095
    0: 0x00000100 -> 0x0007cf85
    0: 0x0007d4b4 -> 0x0007d4b5
    0: 0x0007d56e -> 0x0007d800
    0: 0x00100000 -> 0x00880000
On node 0 totalpages: 8376733
  DMA zone: 56 pages used for memmap
  DMA zone: 110 pages reserved
  DMA zone: 3807 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 494160 pages, LIFO batch:31
  Normal zone: 107520 pages used for memmap
  Normal zone: 7756800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000095000 - 0000000000096000
PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007cf85000 - 000000007d095000
PM: Registered nosave memory: 000000007d095000 - 000000007d3b4000
PM: Registered nosave memory: 000000007d3b4000 - 000000007d427000
PM: Registered nosave memory: 000000007d427000 - 000000007d42d000
PM: Registered nosave memory: 000000007d42d000 - 000000007d42e000
PM: Registered nosave memory: 000000007d42e000 - 000000007d43f000
PM: Registered nosave memory: 000000007d43f000 - 000000007d442000
PM: Registered nosave memory: 000000007d442000 - 000000007d4b4000
PM: Registered nosave memory: 000000007d4b5000 - 000000007d4b6000
PM: Registered nosave memory: 000000007d4b6000 - 000000007d4bc000
PM: Registered nosave memory: 000000007d4bc000 - 000000007d4c4000
PM: Registered nosave memory: 000000007d4c4000 - 000000007d4eb000
PM: Registered nosave memory: 000000007d4eb000 - 000000007d56e000
PM: Registered nosave memory: 000000007d800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u131072
pcpu-alloc: s94552 r8192 d24232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8254767
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32815564k/35651584k available (5221k kernel code, 2144652k absent, 691368k reserved, 7121k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:912
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1999.986 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.97 BogoMIPS (lpj=1999986)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21430 entries in 85 pages
x2apic not enabled, IRQ remapping init failed
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 731094339522 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (47999.66 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7cf85000 (1114112 bytes)
PM: Registering ACPI NVS region at 7d42d000 (4096 bytes)
PM: Registering ACPI NVS region at 7d43f000 (12288 bytes)
PM: Registering ACPI NVS region at 7d4b5000 (4096 bytes)
PM: Registering ACPI NVS region at 7d4bc000 (32768 bytes)
PM: Registering ACPI NVS region at 7d4eb000 (536576 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1018)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 17 
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfbffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.4: reg 10: [mem 0xfb42a000-0xfb42afff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfb429000-0xfb42900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfb428000-0xfb4283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfb400000-0xfb403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfb427000-0xfb4273ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfb426000-0xfb4267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfb425000-0xfb4250ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: reg 10: [mem 0xfb424000-0xfb424fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io  0xe000-0xe07f]
pci 0000:02:00.0: reg 30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.1: reg 10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:11.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:11.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfb300000-0xfb3007ff 64bit]
pci 0000:05:00.0: reg 18: [io  0xd000-0xd0ff]
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xfb200000-0xfb201fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xfb100000-0xfb101fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 09-09]
pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:00.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:0a:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.6:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.6:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.6:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.7:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.7:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfbffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
 pci0000:ff: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
  alloc irq_desc for 48 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 49 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 50 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 51 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 52 on node 0
  alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 48, 49, 50, 51, 52, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 48 for MSI
hpet: hpet3 irq 49 for MSI
hpet: hpet4 irq 50 for MSI
hpet: hpet5 irq 51 for MSI
hpet: hpet6 irq 52 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io  0x0a00-0x0a0f]
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io  0x03f8-0x03ff]
pnp 00:03: [irq 4]
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0081-0x0083]
pnp 00:04: [io  0x0087]
pnp 00:04: [io  0x0089-0x008b]
pnp 00:04: [io  0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x005f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io  0x0400-0x0453]
pnp 00:09: [io  0x0458-0x047f]
pnp 00:09: [io  0x1180-0x119f]
pnp 00:09: [io  0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io  0x0454-0x0457]
pnp 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x0400-0x0453] has been reserved
system 00:09: [io  0x0458-0x047f] has been reserved
system 00:09: [io  0x1180-0x119f] has been reserved
system 00:09: [io  0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [io  0x0454-0x0457] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem disabled]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0:   bridge window [io  disabled]
pci 0000:00:11.0:   bridge window [mem disabled]
pci 0000:00:11.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1:   bridge window [io  disabled]
pci 0000:00:1c.1:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.1:   bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2:   bridge window [io  disabled]
pci 0000:00:1c.2:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3:   bridge window [io  disabled]
pci 0000:00:1c.3:   bridge window [mem disabled]
pci 0000:00:1c.3:   bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 09-09]
pci 0000:00:1c.4: PCI bridge to [bus 09-09]
pci 0000:00:1c.4:   bridge window [io  disabled]
pci 0000:00:1c.4:   bridge window [mem disabled]
pci 0000:00:1c.4:   bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem disabled]
pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.6: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.6:   bridge window [io  disabled]
pci 0000:00:1c.6:   bridge window [mem disabled]
pci 0000:00:1c.6:   bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7:   bridge window [io  disabled]
pci 0000:00:1c.7:   bridge window [mem disabled]
pci 0000:00:1c.7:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xfbffffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0a: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:0a: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x03af]
pci_bus 0000:0d: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:0d: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:0d: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:0d: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0d: resource 10 [mem 0x80000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:02:00.0: Boot video device
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: PCI INT A disabled
pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:07:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13892k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1365418271.650:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 9DE8DDAC5FF4C00B
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 53 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 53 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 54 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 54 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 55 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 55 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
  alloc irq_desc for 56 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:11.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 57 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 61 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 61 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 62 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 62 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
  alloc irq_desc for 63 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.6: irq 63 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
  alloc irq_desc for 64 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.7: irq 64 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb428000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb427000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2013-04-08 10:51:12 UTC (1365418272)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0a8280b1)
[drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
usb 1-1: new high speed USB device number 2 using ehci_hcd
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 70.18.49.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:02:00.0: DCB version 4.0
[drm] nouveau 0000:02:00.0: DCB outp 00: 01000302 00020030
[drm] nouveau 0000:02:00.0: DCB outp 01: 02000300 00000000
[drm] nouveau 0000:02:00.0: DCB outp 02: 02011362 00020010
[drm] nouveau 0000:02:00.0: DCB outp 03: 01022310 00000000
[drm] nouveau 0000:02:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:02:00.0: DCB conn 01: 00002161
[drm] nouveau 0000:02:00.0: DCB conn 02: 00000200
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD780
[drm] nouveau 0000:02:00.0: 0xDA4D: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: 0xDA51: Condition still not met after 20ms, skipping following opcodes
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDC04
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE738
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE751
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE838
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xE89D
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
[drm] nouveau 0000:02:00.0: 0xD5F4: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone  kernel: Available graphics memory: 16416652 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM (DDR3)
[drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
[drm] nouveau 0000:02:00.0: 2 available performance level(s)
[drm] nouveau 0000:02:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[drm] nouveau 0000:02:00.0: 3: core 589MHz shader 1402MHz memory 500MHz voltage 1000mV
[drm] nouveau 0000:02:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
usb 1-1.2: new low speed USB device number 3 using ehci_hcd
[drm] nouveau 0000:02:00.0: MM: using M2MF for buffer copies
usb 1-1.2: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Keykoard
usb 1-1.2: Manufacturer: USB
usb 1-1.2: configuration #1 chosen from 1 choice
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.2/input0
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x310000, bo ffff88086e52b400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
generic-usb 0003:1C4F:0002.0002: timeout initializing reports
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4
generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.2/input1
dracut: Starting plymouth daemon
firewire_ohci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:05:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 65 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 65 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426100 irq 65
ata2: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426180 irq 65
ata3: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426200 irq 65
ata4: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426280 irq 65
ata5: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426300 irq 65
ata6: SATA max UDMA/133 abar m2048@0xfb426000 port 0xfb426380 irq 65
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
ata5.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access     ATA      WDC WD1003FBYX-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
 sdb:
 sde:
 sdc:
 sdd: unknown partition table
sd 5:0:0:0: [sde] Attached SCSI disk
 sda1
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb1 sdb2 sdb3 sdb4 < sdc1 sdc2 sdc3 sdc4 < unknown partition table
sd 4:0:0:0: [sdd] Attached SCSI disk
 >
sd 3:0:0:0: [sdc] Attached SCSI disk
 >
sd 2:0:0:0: [sdb] Attached SCSI disk
firewire_core: created device fw0: GUID 0010dc0001d230e3, S400
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: raid10 personality registered for level 10
bio: create slab  at 1
md/raid10:md127: active with 4 out of 4 devices
md127: detected capacity change from 0 to 1900411879424
 md127: p1 p2 p3 p4 <
md: md127 switched to read-write mode.
 p5 p6 p7 p8 >
EXT4-fs (md127p5): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/md127p5
dracut: Loading SELinux policy
type=1404 audit(1365418285.210:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277524 rules.
SELinux: 2048 avtab hash slots, 277524 rules.
SELinux:  9 users, 12 roles, 3897 types, 205 bools, 1 sens, 1024 cats
SELinux:  81 classes, 277524 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev md127p5, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1365418285.692:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
md: export_rdev(sde)
md: export_rdev(sdd)
md: export_rdev(sdc)
md: export_rdev(sdb)
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 66 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
hda_intel: Disabling MSI
snd_hda_intel 0000:02:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input16
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 17, io mem 0xfb200000
  alloc irq_desc for 67 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 67 for MSI/MSI-X
  alloc irq_desc for 68 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 68 for MSI/MSI-X
  alloc irq_desc for 69 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 69 for MSI/MSI-X
  alloc irq_desc for 70 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 70 for MSI/MSI-X
  alloc irq_desc for 71 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 71 for MSI/MSI-X
  alloc irq_desc for 72 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 72 for MSI/MSI-X
  alloc irq_desc for 73 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 73 for MSI/MSI-X
  alloc irq_desc for 74 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:06:00.0: irq 74 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:06:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:06:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:07:00.0: setting latency timer to 64
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 18, io mem 0xfb100000
  alloc irq_desc for 75 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 75 for MSI/MSI-X
  alloc irq_desc for 76 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 76 for MSI/MSI-X
  alloc irq_desc for 77 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 77 for MSI/MSI-X
  alloc irq_desc for 78 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
  alloc irq_desc for 79 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 79 for MSI/MSI-X
  alloc irq_desc for 80 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 80 for MSI/MSI-X
  alloc irq_desc for 81 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X
  alloc irq_desc for 82 on node -1
  alloc kstat_irqs on node -1
xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:07:00.0
usb usb5: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-358.2.1.el6.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:07:00.0
usb usb6: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:0a:00.0: setting latency timer to 64
  alloc irq_desc for 83 on node -1
  alloc kstat_irqs on node -1
r8169 0000:0a:00.0: irq 83 for MSI/MSI-X
r8169 0000:0a:00.0: eth0: RTL8168evl/8111evl at 0xffffc90013e0e000, 8c:89:a5:80:32:a4, XID 0c900800 IRQ 83
r8169 0000:0a:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
EDAC MC: Ver: 2.1.0 Mar 13 2013
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
EXT4-fs (md127p1): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev md127p1, type ext4), uses xattr
EXT4-fs (md127p2): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev md127p2, type ext4), uses xattr
EXT4-fs (md127p8): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev md127p8, type ext4), uses xattr
EXT4-fs (md127p6): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev md127p6, type ext4), uses xattr
EXT4-fs (md127p3): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev md127p3, type ext4), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3-fs (loop0): using internal journal
EXT3-fs (loop0): mounted filesystem with ordered data mode
SELinux: initialized (dev loop0, type ext3), uses xattr
Adding 8388600k swap on /dev/md127p7.  Priority:-1 extents:1 across:8388600k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:0a:00.0: firmware: requesting rtl_nic/rtl8168e-3.fw
r8169 0000:0a:00.0: eth0: link down
r8169 0000:0a:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:0a:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

Return To Intel Xeon E5-2620 0 System Information